Acme Air Curtains help maintain clean and hygienic indoor environments at various commercial establishments, such as retail outlets, grocery stores, restaurants, universities, hospitals and transport terminals.
Model MV-N
with centrally mounted fractional hp motor
Where to use
Ideally for commercial openings of 48 to 72 inches height
Primary purpose
Prevents dust, conditioned air losses, odor and fumes from entering through doors or pathways
Sizes
Available in lengths from 30 to 72 inches, in increment of 6 inches
Colour
Note:
Black is a default colour. White is available on request at the time pf placing an order. Custom colour is available on MOQ above 6 units.
Technical Details
- Average Velocity at source 6 – 8 m/sec delivering 1 -1.5 m/sec at floor level.
- Cfm of air draft 515 min to 1245 max.
- Noise level @ distance of 10 feet from unit in controlled environment 58 dB in to 67 dB max.
- 1-phase motor.
- All units with totally sealed deep groove double bearings lubricated with synthetic lubricant.
- All units with single piece aluminum alloy flow fans.
- Equipment is good for non-hazardous environments
- All SS fasteners.
- Metal to metal contact points of chassis provided with neoprene rubber separators.
Note:
Velocity of air curtain at the floor level / at the end of opening varies with the height of every entrance and the pressure difference between the indoors and outdoors. Above results are under test conditions at our factory site only, which may vary under actual site condition. All velocities & cfm measured without pre-filters. Above images are not to the scale, for representative purposes only. All/Any specifications may undergo a change without prior notice.
Features
- Auto actuation – L/s – delay timer with magnetic sensor optional
- Material of Construction* – CRC MS standard
(*determined by Acme Air Curtains based on actual site conditions)
- Colour Options* – Black, Ivory or Custom*. Black is standard.
- Prefilters
- Hazardous conditions
- Control Panels
- Enhanced Motor Requirements
Note:
These features are not available by default in all our models. These are add-on features. Acme Air Curtains are customized to suit specific site conditions and hence would require prior guidelines to incorporate these features
Custom colour can be requested for MOQ of 6 units or more. Additional charges apply.
For speciality high efficiency air curtains, please connect with our customer care. These are custom engineered air curtains available on request. Ideal for openings experiencing high outside wind velocities and/or wind tunnel effect and/or equipments required for hazardous work areas.
Model HV-N
with centrally mounted fractional hp motor
Where to use
Ideally for commercial openings of 60 to 84 inches height.
Primary purpose
Prevents dust, conditioned air losses, odor and fumes from entering through doors or pathways.
Sizes
Available in lengths from 30 to 72 inches, in increment of 6 inches
Colour
Note:
Black is a default colour. White is available on request at the time pf placing an order. Custom colour is available on MOQ above 6 units.
Technical Details
- Average Velocity at source 9 – 11 m/sec delivering 1 -1.5 m/sec at floor level.
- Cfm of air draft 985 min to 2364 max.
- Noise level @ distance of 10 feet from unit in controlled environment 60 dB in to 69 dB max.
- 1-phase motor.
- All units with totally sealed deep groove double bearings lubricated with synthetic lubricant.
- All units with single piece aluminum alloy flow fans.
- Equipment is good for non-hazardous environments
- All SS fasteners.
- Metal to metal contact points of chassis provided with neoprene rubber separators.
Note:
Velocity of air curtain at the floor level / at the end of opening varies with the height of every entrance and the pressure difference between the indoors and outdoors. Above results are under test conditions at our factory site only, which may vary under actual site condition. All velocities & cfm measured without pre-filters. Above images are not to the scale, for representative purposes only. All/Any specifications may undergo a change without prior notice.
Features
- Auto actuation – L/s – delay timer with magnetic sensor optional
- Material of Construction* – CRC MS standard
(*determined by Acme Air Curtains based on actual site conditions)
- Colour Options* – Black, Ivory or Custom*. Black is standard.
- Prefilters
- Hazardous conditions
- Control Panels
- Enhanced Motor Requirements
Note:
These features are not available by default in all our models. These are add-on features. Acme Air Curtains are customized to suit specific site conditions and hence would require prior guidelines to incorporate these features
Custom colour can be requested for MOQ of 6 units or more. Additional charges apply.
For speciality high efficiency air curtains, please connect with our customer care. These are custom engineered air curtains available on request. Ideal for openings experiencing high outside wind velocities and/or wind tunnel effect and/or equipments required for hazardous work areas.
Model EHV-N
with centrally mounted fractional hp motor
Where to use
Ideally for commercial openings of 72 to 96 inches height
Primary purpose
Prevents dust, conditioned air losses, odor and fumes from entering through doors or pathways
Sizes
Available in lengths from 30 to 72 inches, in increment of 6 inches
Colour
Note:
Black is a default colour. White is available on request at the time pf placing an order. Custom colour is available on MOQ above 6 units.
Technical Details
- Average Velocity at source 10 – 12 m/sec delivering 1 -1.5 m/sec at floor level.
- Cfm of air draft 1180 min to 2835 max.
- Noise level @ distance of 10 feet from unit in controlled environment 60 dB in to 69 dB max.
- 1-phase motor.
- All units with totally sealed deep groove double bearings lubricated with synthetic lubricant.
- All units with single piece aluminum alloy flow fans.
- Equipment is good for non-hazardous environments
- All SS fasteners.
- Metal to metal contact points of chassis provided with neoprene rubber separators.
Note:
Velocity of air curtain at the floor level / at the end of opening varies with the height of every entrance and the pressure difference between the indoors and outdoors. Above results are under test conditions at our factory site only, which may vary under actual site condition. All velocities & cfm measured without pre-filters. Above images are not to the scale, for representative purposes only. All/Any specifications may undergo a change without prior notice.
Features
- Auto actuation – L/s – delay timer with magnetic sensor optional
- Material of Construction* – CRC MS standard
(*determined by Acme Air Curtains based on actual site conditions)
- Colour Options* – Black, Ivory or Custom*. Black is standard.
- Prefilters
- Hazardous conditions
- Control Panels
- Enhanced Motor Requirements
Note:
These features are not available by default in all our models. These are add-on features. Acme Air Curtains are customized to suit specific site conditions and hence would require prior guidelines to incorporate these features
Custom colour can be requested for MOQ of 6 units or more. Additional charges apply.
For speciality high efficiency air curtains, please connect with our customer care. These are custom engineered air curtains available on request. Ideal for openings experiencing high outside wind velocities and/or wind tunnel effect and/or equipments required for hazardous work areas.